Shuttle DS47

Valoración del Usuario:  / 2
MaloBueno 

Shuttle DS47

Producto cedido por Shuttle para su análisis:

Shuttle

1.- Introducción y Características Técnicas

Cada vez mas el mercado demanda equipos compactos, silenciosos y con unas prestaciones adecuadas para navegar, ofimática y juegos 2D. Es precisamente este mercado el que mas ha crecido estos últimos años. Shuttle denomina SlimPC a esta gama. Equipos con un máximo de 1,5 litros, con opción de colgarse detrás de la TV/Monitor y con potencia mas que suficiente para el uso comentado. El modelo analizado hoy es el DS47, cuenta con un procesador integrado Intel Celeron 847 y con el silencio como mayor virtud, ya que es completamente pasivo. Para funcionar solo necesitaremos memoria DDR3 SO-DIMM y un disco de 2,5”; y a disfrutar. No dejéis de leer y podréis ver hasta donde puede llegar el compacto de Shuttle.

Shuttle DS47

Shuttle es una marca pionera en la creación de equipos compactos. Fundada en 1983 tiene entre sus hitos el haber desarrollo la primera placa base de 17x17 cm del mundo para el mercado OEM. Es uno de los líderes en el sector de MiniPC’s, y actualmente ha ampliado su mercado con equipos TodoEnUno y una nueva división de NAS.

A continuación describimos todas las características del equipo:

  • Fanless and silent
    • Passive cooling, no fan noise at all
    • Perfect to be used in noise-sensitive environments
    • Fanless, dust-free and thus virtually maintenance-free
    • -Low power consumption
    • Power consumption: idle: 10-11W, full load: 22-30W (without/with graphics)
    • (measured with 2x 2GB SO-DIMM, 500 GB 2.5" hard disk)
  • 24/7 nonstop operation
    • This device is approved for 24/7 permanent operation.
    • Requirements:
      • Free circulation of air amongst the PC must be guaranteed.
      • Ventilation holes must stay clear.
      • If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
  • Chassis
    • Slim-PC (Nettop) with black chassis made of steel
    • Without cooling fan, passive cooling only
    • The bays for memory, 2.5" drives and Mini-PCIe cards
    • can be easily accessed by removing two cover plates.
    • Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
    • Weight: 1.43 kg net and 2.13 kg gross
    • Two holes for Kensington Lock and numerous 
    • threaded holes (M3) at both sides of the chassis
    • Operation Position:
      • 1) Device must only be used in vertical position with the DVI port facing up
      • 2) Please make sure to use either the supplied feet or the VESA mount
  • Operation System
    • This barebone system comes without operating system.
    • It is compatible with Windows 8, Windows 7, Windows XP and Linux
    • Supports 32 and 64 bit.
  • Processor
    • Model: Intel Celeron 847
    • Code name: Sandy Bridge (2nd Gen. Core)
    • Cores / Threads: 2 / 2
    • Clock rate: 1.1 GHz
    • L1/L2/L3 cache: 128 kB / 512 kB / 2048 kB
    • Memory controller: DDR3-1066/1333 Dual Channel
    • TDP wattage: 17 W maximum, 13.8W typical
    • Manufacturing process: 32 nm
    • Socket: FCBGA1023
    • Enhanced SpeedStep technology
    • Maximum Tjunction Temperature: 100°C
    • Integrated Intel HD graphics engine
    • Supports 64 Bit, VT-x with EPT, SpeedStep
  • Integrated graphics
    • Intel HD graphics
    • Clock rate: 350~800 MHz
    • Maximum resolution: 2560 x 1600 (analog), 1920 x 1200 (digital, DVI-D / HDMI)
    • Execution Units (EU): 6
    • Supports two independent screens
    • Supports DirectX 10.1, Shader 4.1, OpenGL 3.0
    • HDMI supports HD video plus multi-channel digital audio via a single cable
  • Mainboard / Chipset / BIOS
    • Shuttle Mainboard FS47
    • All capacitors are high quality solid capacitors
    • Chipset: Intel® NM70 Express
    • Supports resume after power failure
    • Supports Wake on LAN (WOL)
    • Supports Power on by RTC Alarm
    • Supports boot from USB devices and SD card reader
    • AMI BIOS in 8 MByte EEPROM with SPI interface
    • Supports hardware monitoring and watch dog functionality
    • Supports Unified Extensible Firmware Interface (UEFI) [1]
  • Power Adapter
    • External 65 W power adapter (fanless)
    • Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    • Output: 19 V DC, max. 3.42 A, max. 65 W
    • DC Connector: 5.5/2.5mm (outer/inner diameter)
  • Memory support
    • 2x SO-DIMM slots with 204 pins
    • Supports DDR3-1066 (PC3-8500) and DDR3-1333 (PC3-10600) SDRAM
    • DDR3-1600 (PC3-12800) is supported at 1333 MHz clock rate.
    • Supports Dual Channel mode
    • Supports max. 8 GB per DIMM,  maximum total size of 16 GB
    • Supports two unbuffered DIMM modules (no ECC)
  • Mini PCIe Slots
    • Two Mini PCI Express expansion slots: full size and half size
      • 1) the half size slot is occupied with a WLAN module
      • 2) the full size slot supports PCIe 2.0, SATA 3G and USB 2.0
    • and can either be used for a Mini-PCIe card or
    • for a Mini SATA (mSATA) flash memory card [3]
    • Please use the "Mini-PCIE / mSATA Select" function in the BIOS setup.
  • Audio
    • Audio Realtek® ALC 662 High-Definition Audio (5.1 channel)
    • Two analog audio connectors (3.5mm) at the back panel: 
      • 1) 2 channel line out (head phone)
      • 2) microphone input
    • Digital multi-channel audio output: via HDMI
  • Dual Gigabit LAN Controller
    • Dual Realtek 8111G Ethernet network controller (Gigabit)
    • Supports 10 / 100 / 1.000 MBit/s operation
    • With two RJ45 ports (dual network) supports Teaming [2]
    • Supports WAKE ON LAN (WOL)
    • Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    • Built-in Mini-PCIe WLAN card (half size) and internal antenna
    • Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
    • Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
  • 2.5" drive bay
    • Supports one Serial ATA hard disk
    • or one SATA SSD drive in 6.35cm/2.5" format
    • Device height: 9.5 or 12.5 mm (max.)
    • Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
    • Supports Unified Extensible Firmware Interface (UEFI) [1]
    • Note: no Serial ATA cable is required
  • Card Reader
    • Integrated SD card reader 
    • Supports SD, SDHC and SDXC memory flash cards
    • Supports boot up from SD card
  • Front Panel connectors
    • 4x USB 2.0
    • 2x RS232 serial ports (5V/12V, 1x switchable to RS422 / RS485)
    • SD card reader (supports SD, SDHC, SDXC)
    • Power button
    • Power LED (blue)
    • HDD LED (yellow)
  • Back Panel connectors
    • HDMI 1.3 connector (supports DVI-D with optional adapter)
    • DVI-I connector (supports VGA with optional adapter)
    • 2x USB 3.0
    • 2x Gigabit LAN (RJ45)
    • Microphone input
    • Audio Line-out (headphone)
    • DC-input connector for external power adapter
    • 4 pin connector (2.54 mm pitch) for power button, Clear CMOS and 5V DC [4]
    • Perforation for optional Wireless LAN antennas (2 holes)
  • Other onboard connectors
    • Connector for CMOS battery (with battery)
    • Fan connector (4 pins) not occupied
    • LVDS connector (50 pins)
    • Jumpers for panel voltage and converter voltage select
  • Scope of delivery
    • Multi-language user guide
    • Two metal feet
    • VESA mount for 75/100mm standard (two metal brackets)
    • Four thumbscrews M3 x 5 mm (screws together VESA mount and PC)
    • Four screws M4 x 10 mm (to fix the VESA mount to the external device)
    • Three screws M3 x 4 mm and a rack (to mount a 2.5" storage into the bay)
    • Driver DVD (Windows 8 / 7 / XP)
    • External power adapter with power cord
  • Environmental Specifications
    • Operating temperature range: 0~40 °C [5]
    • Relative humidity, non-condensing: 10~90%
  • Conformity/Certifications
    • EMI: FCC, CE, BSMI, C-Tick
    • Safety: CB, BSMI, ETL, CCC
    • This device is classed as a technical information
    • equipment (ITE) in class B and is intended for use in 
    • living room and office. The CE-mark approves the 
    • conformity by the EU-guidelines:
      • EMV-guideline 89/336/EWG electromagnetic tolerance
      • LVD-guideline 73/23/EWG use of electric devices 
    • within certain voltage-limits

[1] Unified Extensible Firmware Interface (UEFI) - required when booting from hard disks larger than 2.2 TB

[2] Teaming Mode

The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.

[3] mini-SATA (mSATA)

not to be confused with the "micro SATA" connector, is a newer industry standard which converts the electrical SATA interface (1.5 or 3.0 Gbit/s) to the pysical "Mini PCI Express" mini card form factor.

[4] Four pin header at the back panel

This header allows for connecting an external power button.

It also provides 5V DC voltage for external devices and the Clear CMOS function.

[5] Caution: for high ambient temperature over 35°C we strongly recommend to use SSDs (supporting at least 70°C) and rugged SODIMM memory with wide temperature range (up to 95°C). 

 

BIGtheme.net Joomla 3.3 Templates

Nuestro Twitter